Purpose: The purpose of this blog is to show how AppController and XenMobile Device Manager are integrated. Please note that there is no change in the way you integrate for XenMobile 9.0.

On XenMobile Device Manager:

1)      Open XenMobile Device Manager Administrator console.

2)      Click on Options.

3)      Under Modules Configurations, click on AppController.

4)      Check Enable AppController.

5)      Enter Host Name and Shared Key.

6)      Click on close button at the bottom.

7)      Click save changes.

On AppController:

1)      Logon to AppController Administrative Console.

2)      Go to Settings tab. Enter appropriate AGVIP details in the Deployment tab.

3)      Click on XenMobile MDM.

4)      Enter the required details.

5)      Click on Test Connection.

6)      You should get a message that Test Connection was successful.

7)      Click on Close button.

8)      Click on Save button.

9)      AppController will now talk to XenMobile Device Manager and will Create Packages.

On XenMobile Device Manager:

1)      Open XenMobile Device Manager administrator console.

2)      Click on Options.

3)      Under Modules Configurations, click on AppController.

4)      Click Check Connection.

5)      You should receive a Success Message.

Note: Till XenMobile 8.7 we used to get a Connection State: Success and a Response: <NetScaler Gateway> or < App Controller > depending on the configuration in AppController. However on XenMobile 9.0 we are able to see only the Connection State.